Clarke 2090901 Operating & Maintenance Instructions - Page 11

Browse online or download pdf Operating & Maintenance Instructions for Air Compressor Clarke 2090901. Clarke 2090901 20 pages.

Print Page

MAINTENANCE

DAILY

Drain Air Receiver of any condensate

Check engine oil level and top up where necessary. Ensure the dipstick

breather hole is not blocked.

Check pump oil level

WEEKLY

a. Clean Pump Filter

Turn Pump Filter cover and pull away to reveal paper element. If badly

contaminated, replace. Remove any loose contaminants if any then

replace.

Clean the engine cooling fins.

6 MONTHLY

Renew pump lubricating oil. and

Make sure the cylider head bolts are

tight (see below)

Drain pump by removing the drain

screw (Arrowed in Fig.3).

Replace screw and top up until oil is

level with the mark on the dipstick,

using compressor oil available from your

Clarke dealer as follows: Part No.

3050796

In addition to the above, check the engine manual for service

schedule.

Repairs should only be carried out by a qualified engineer. If problems

Torque values for cylinder head bolts

MODEL NUMBER

PP9ND, CFP9ND

occur, contact your Clarke dealer.

Fig.3

- 11 -

Torque Vaule

(NM)

8.8 - 9.3