Directed Security and Remote Start Installation Manual - Page 10

Browse online or download pdf Installation Manual for Car Alarm Directed Security and Remote Start. Directed Security and Remote Start 20 pages. Security and remote start

Print Page

Feature menus and descriptions

The default settings are indicated in bold type. The number in parentheses indicates the number of times the siren chirps

Menu 1 - Basic

M e n u
One-chirp setting
Item
Active Arming
1
2
Arm/disarm chirps on
3
Ignition lock On
4
Ignition unlock On
5
Active locking only
6
Panic with ignition On
7
0.8 second door lock pulses (1)
8
Forced passive arming on
9
Automatic engine disable on
10
Armed When Driving (AWD) On
11
Code Hopping On
12
Horn Output Pulsed
13
Horn function Full Alarm Only (1)
14
Comfort Closure ON (1)
The features of the system are described below. Features that have additional settings when programming with the Bitwriter® only, are indi-
cated by the following icon:

Menu 1 - Descriptions

1. System Arming mode
1.
Active: the transmitter must be used to arm the system
2.
Passive Arm: after exiting the vehicle the system will automatically arm.
2. Arm/Disarm chirps
On:
1.
arm, disarm chirps are active
2.
Off : arm, disarm chirps are defeated.
3. Ignition Lock
Off:
1.
the door lock output will not output when ignition is turned off.
2.
On: The door lock output will activate when the ignition is turned o
4. Ignition Unlock
1.
Off: the door unlock output will not output when ignition is turned on.
2.
On: The door unlock output will activate when the ignition is turned on.
5. Active/Passive Locking:
If passive arming is selected in Feature 1-1, then the system can be programmed to either lock the doors when passive arming occurs, or only
lock the doors when the system is armed via the transmitter.
1.
Active locking: The system will not lock the doors when it passively arms.
2.
Passive locking: The system will lock the doors when it passively arms.
Note: Remember, when passive arming is selected, the unit will chirp 20 seconds after the last door is closed. The system does not actually arm
or lock the doors until 30 seconds after the door has been closed.
10
Two-chirp setting
Passive arming
Arm/disarm chirps Off
Ignition lock Off
Ignition unlock Off
Passive locking
No panic with ignition On
3.5 (2), 0.4 (3) seconds
Forced passive arming off
Automatic engine disable off
AWD Off
Code Hopping off
Constant
Siren function - chirp length
20mS (2), 30mS (3), 40mS (4), 50mS (5)
Comfort Closure OFF (2)
Comfort Closure 2 (3)
n
© 2012 Directed. All rights reserved.