Zanussi ZWQ 5103 User Manual - Page 6

Browse online or download pdf User Manual for Washer Zanussi ZWQ 5103. Zanussi ZWQ 5103 13 pages.
Also for Zanussi ZWQ 5103: User Manual (16 pages)

Print Page

• To change the timer delay period, you must

go through the "Stop" position

programme your cycle.

The lid will be locked during the delayed start

time. If you need to open it, you must first pause

the appliance by pressing the "Start/Pause"

pushbutton. After closing the lid again, press

the "Start/Pause"

Start of the programme

Press the "Start/Pause"

the cycle. The corresponding light will come on

green. It is normal for the programme selector

to remain stationary during the cycle. The light

corresponding to the current cycle is illumina-

ted.

: Prewash + Wash

: Rinses + Spin

: End of cycle

The drain pump can operate for a short

time when the appliance fills water.

Interrupting a programme

Adding washing during the first 10 mi-

nutes

Press the "Start/Pause"

corresponding light will flash green while the

Stand by: once the programme has fin-

ished after a few minutes the energy sav-

ing system is enabled with the pilot lights

Washing programmes

Programme / Type of washing

Cottons (30° - 90°) : White or colour, e.g.

normally soiled work clothes, bed linen, table lin-

en, body linen, towels.

Max. spin speed: 850 rpm for model ZWP581/

1000 rpm for model ZWQ5102,ZWQ5103/

1200 rpm for model ZWQ5122

Cotton Eco (40°and 60°)

colour, e.g. normally soiled work clothes, bed lin-

en, table linen, body linen, towels.

Max. spin speed: 850 rpm for model ZWP581/

1000 rpm for model ZWQ5102,ZWQ5103/

1200 rpm for model ZWQ5122

and re-

pushbutton.

pushbutton to start

pushbutton : the

: White or

appliance is paused. The lid can only be

opened around 2 minutes after the washing

machine has come to a stop. Press the "Start/

Pause"

pushbutton again to continue the

programme.

Modifying the programme in progress

Before making any changes to the current pro-

gramme, you need to pause the washing ma-

chine by pressing the "Start/Pause"

button. If the modification is not possible, the

"Start/Pause"

few seconds. If you still decide to change the

programme, you must cancel the current pro-

gramme (see below).

Cancelling the programme

If you want to cancel the programme, turn the

programme selector to the "Stop"

End of the programme

The washing machine stops automatically, the

"Start/Pause"

light "End of cycle"

only be opened around 2 minutes after the

washing machine has come to a stop. Turn the

programme selector to the "Stop" position

Remove washing. Unplug and close water inlet

tap.

switched on. By pressing any button the appli-

ance will come out of the energy saving status.

Load

5,5 kg

Rinse hold, Quick, Prewash, Extra rinse,

Delay start

5,5 kg

Rinse hold, Prewash, Extra rinse, Delay

start

pushbutton flashes red for a

position.

pushbutton goes out and the

comes on. The lid can

Available options

www.zanussi.com

push-