Zanussi ZWS 510801 User Manual - Page 11

Browse online or download pdf User Manual for Washer Zanussi ZWS 510801. Zanussi ZWS 510801 21 pages.

2. Turn the programme knob again to activate the
appliance. Now, you can set a new washing
programme.
Before starting the new programme
the appliance could drain the water. In
this case, make sure that the detergent
is still in the detergent compartment, if
not fill the detergent again.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
1. Press the button Start/Pause.
The indicator flashes.
2. Change the options.
3. Press the button Start/Pause again.
The programme continues.
OPENING THE DOOR
While a programme or the delay start operates, the
appliance door is locked.
CAUTION! If the temperature and
level of the water in the drum are too
high and the drum still rotates, you
cannot open the door.
To open the door during the first minutes of the
cycle or when the delay start operates:
1. Press the button Start/Pause to pause the
appliance.
2. Wait some minutes until the door unlocks.
3. You can open the door.
4. Close the door and touch the button Start/
Pause again. The programme (or the delay)
continues.
AT THE END OF THE PROGRAMME
The appliance stops automatically.
The indicator of the button Start/Pause goes off.
The phase indicator End illuminates and stays
on.

HINTS AND TIPS

THE LAUNDRY LOAD
Divide the laundry in: white, coloured,
synthetics, delicates and wool.
Obey the washing instructions that are on the
laundry care labels.
Do not wash white and coloured items together.
Turn the programme knob to position
deactivate the appliance.
After some minutes you can open the door.
Remove the laundry from the appliance. Make
sure that the drum is empty.
Close the water tap.
Keep the door and the detergent drawer ajar, to
prevent the mildew and odours.
The washing programme is completed, but
there is water in the drum:
The drum turns regularly to prevent the creases
in the laundry.
The indicator
stays on.
The indicator Start/Pause flashes to remind you
to drain the water.
You must drain the water to open the door.
Draining the water:
1. Set a draining (Drain) or a spinning (Spin)
programme.
2. Press the button Start/Pause.
The appliance drains the water and spins.
3. When the programme is completed:
The indicator Start/Pause goes off and the
phase indicator End illuminates.
After some minutes the door unlocks; you
can now open the door.
4. Turn the programme knob to the position
deactivate the appliance.
STAND BY
Some minutes after the end of the washing
programme, if you do not deactivate the appliance,
the energy saving status activates. The energy
saving status decreases the energy consumption
when the appliance is on the standby:
The brightness of the indicators reduces.
The indicator of the button Start/Pause flashes
slowly.
Press one of the buttons to deactivate the energy
saving status.
Some coloured items can discolour with the first
wash. We recommend that you wash them
separately for the first times.
Button up pillowcases, close zippers, hooks and
poppers. Tie up belts.
Empty the pockets and unfold the items.
Turn multilayered fabrics, wool and items with
painted illustrations inside out.
to
to
11