Zanussi ZWS 688 User Manual - Page 7

Browse online or download pdf User Manual for Washer Zanussi ZWS 688. Zanussi ZWS 688 24 pages.

Print Page

Programme selector dial, spin speed button and available options

Programme Selector Dial

It allows you to switch the appliance on/off and/

or to select a programme.

Available options:

Spin Reduction

By pressing this button you can change the spin

speed of the selected programme or to select

Rinse Hold or No Spin option.

No spin

By selecting this option, all spinning phases are

suppressed and replaced by a drain, so as not

to wrinkle the laundry. Recommended for ex-

tremely delicate fabrics. On some programmes

the rinses will be performed with more water.

Rinse hold

By selecting this function the water of the last

rinse is not emptied out to prevent the fabrics

from creasing. Before opening the door it will be

necessary to empty out the water. To empty out

the water, please read the paragraph «At the

end of the programme».

Prewash

By selecting this option the machine performs a

prewash cycle before the main wash phase. The

washing time will be prolonged. This option is

recommended for heavily soiled laundry.

Super Quick

Short cycle for lightly soiled items or for laundry

which needs only freshening up. We recom-

mend you to reduce the fabrics loading.

Extra Rinse

This appliance is designed to save energy. If it

necessary to rinse the laundry using an extra

First use

• Ensure that the electrical and water con-

nections comply with the installation in-

structions.

• Remove the polystyrene block and any

material from the drum.

www.zanussi.com

quantity of water (extra rinse), select this option.

Some additional rinses will be performed. This

option is recommended for people who are al-

lergic to detergents, and in areas where the wa-

ter is very soft.

Start Pause

This button allows you to start or to interrupt the

selected programme.

Delay Start

The start of the programme can be delayed by

3, 6 or 9 hours by means of this button.

Indicator pilot light

When selecting a washing programme both

lights A and B illuminate.

After having pressed the button 5 the only

light corresponding to the running phase

stays on. The machine starts working and the

door is locked.

The light C illuminates at the end of the wash-

ing cycle. After a few minutes the door can be

opened.

If the draining programme is selected any

light will illuminate.

• Pour 2 litres of water into the main wash

compartment

in order to activate the ECO valve. Then

run a cotton cycle at the highest temper-

ature without any laundry in the machine,

to remove any manufacturing residue

from the drum and tub. Pour 1/2 a

of the detergent drawer