Zanussi ZWT 12120 User Manual - Page 18

Browse online or download pdf User Manual for Washer Zanussi ZWT 12120. Zanussi ZWT 12120 24 pages. Top-loading washing machine

Print Page

18 operating problems

Problems

Wash is unsatisfactory :

The appliance vibrates, is

noisy :

the wash cycle is much too

long :

The

washing

machine

stops during a wash cycle :

The lid doesn't open at the

end of the cycle :

The

"Start/Pause"

pushbutton

flashes red

Causes

• the detergent is unsuitable for machine

washing,

• there is too much washing in the drum,

• the wash cycle is unsuitable,

• there isn't enough detergent.

• the appliance hasn't been untied properly (see

untying section),

• the appliance isn't level and is unbalanced,

• the appliance is too close to the wall or furni-

ture,

• washing is unevenly distributed in the drum,

• the load is too small.

• the water inlet filters are dirty,

• the power or water supply has been cut off,

• the motor overheating detector has been acti-

vated,

• the water inlet temperature is lower than usual,

• the foam detection security system has been

activated (too much detergent) and the washing

machine has begun draining the foam,

• the out of balance detector has been activated :

an extra phase has been added to distribute

washing more evenly in the drum.

• the water or electricity supply is defective

• a Rinse hold has been selected,

• the drum shutters are open.

• the "immediate opening"

• the temperature inside the drum is too high,

• the lid unlocks 1 - 2 minutes after the end of the

cycle*.

• the lid isn't closed properly.

***

light is not lit,