Zanussi DES 959 Instruction Booklet - Page 16

Browse online or download pdf Instruction Booklet for Dishwasher Zanussi DES 959. Zanussi DES 959 28 pages. Zanussi dishwasher instruction des 959

Print Page

Operating sequence

Press the On/Off push button

The On/Off indicator light comes on, also the

indicator lights of the last selected programme

and relative options come on.

Check that

there is rinse aid and salt

The corresponding indicator lights will illuminate

if refilling is necessary.

Open the door and check the

filters

Ensure they are clean and properly positioned

(see "Maintenance and cleaning").

Load the dishes

Remove any scraps of food.

Pull the lower basket out and arrange the

saucepans, plates and cutlery in it.

Pull the upper basket out and arrange the

plates, saucers, glasses and cups etc. in it.

Slide the baskets back into the machine.

Ensure that the spray arms can

rotate freely.

Measure out detergent

Add the required amount of detergent into the

dispenser.

Close the detergent dispenser lid.

Important!

If "half load" option is selected remember to

reduce the quantity of detergent

Close the dishwasher door

8a. Setting and starting the

programme without "delay

start"

Press the push button corresponding to the

desired programme. The indicator lights of

the programme and all the phases the

programme consists of will come on. In the

digital display appears the duration (in

minutes) of the programme.

Select if necessary the washing on only one

basket by pressing the half load push

button.

Remember to load all dishes into the

selected basket.

Press "programme start" push button, an

audible signal advises you that the

programme has started.

The display will show the running time

of the programme and the indicator lights of

the phases will turn off except for the

indicator light of the current phase.

The time in the digital display will start to

decrease from minute to minute.

If the door is opened during the run of the

programme the current phase will be

interrupted and the indicator light of the

interrupted phase will start to flash.

Once the door is closed the programme will

start from the point where it was interrupted.

SEQ32en