Zanussi DW 4803 Instruction Booklet - Page 19

Browse online or download pdf Instruction Booklet for Dishwasher Zanussi DW 4803. Zanussi DW 4803 22 pages. Dishwasher dw 4803

Print Page

Installation instructions

Any electrical work required to install this

appliance should be carried out by a

qualified electrician or competent person.

Any plumbing work required to install this

appliance should be carried out by a

qualified plumber or competent person.

Remove all packaging before positioning the

machine.

If possible, position the machine next to a water tap

and a drain.

This dishwasher may be fed with either hot (max.

60°C) or cold water.

Nevertheless we advise a cold water supply.

A hot water supply is not always efficient with very

soiled crockery as it shortens the washing

programmes.

Feeding the appliance with a hot water supply (max.

60°C) will allow you to obtain considerably shorter

programmes.

The water pressure must be within the limits given in

the technical specifications.

Your local Water Authority will advise you on the

average mains pressure in your area.

The dishwasher features fill and drain hoses which

can be turned either to the left or the right to suit the

installation.

The locknut must be correctly fitted to avoid water

leaks.

Avoid bends or kinks in the hose which could prevent

or slow down the water supply.

If the machine is connected to new pipes or pipes

which have not been used for a long time, you should

run the water for a few minutes before connecting the

inlet hose. This will prevent deposits of sand or rust

clogging the inlet hose filter.

For making the connection itself, the coupling nut fitted

to the machine's supply hose is designed to screw

onto either a 3/4" inch gas thread spout, or to a

purpose made quick-coupling tap such as the Press-

block.

CA17

COL04en