Zanussi ZDT36001FA User Manual - Page 12
Browse online or download pdf User Manual for Dishwasher Zanussi ZDT36001FA. Zanussi ZDT36001FA 21 pages.
Print Page
HINTS AND TIPS
GENERAL
Follow the hints below to ensure optimal cleaning
and drying results in daily use and to help you
protect the environment.
•
Remove larger residues of food from the dishes
into the waste bin.
•
Do not pre-rinse dishes by hand. When needed,
select a programme with a prewash phase.
•
Always use the whole space of the baskets.
•
Make sure that items in the baskets do not
touch or cover each other. Only then can the
water completely reach and wash the dishes.
•
You can use dishwasher detergent, rinse aid
and salt separately or you can use the multi-
tablets (e.g. ''All in 1''). Follow the instructions
on the packaging.
•
Select a programme according to the type of
load and the degree of soil.
most efficient use of water and energy
consumption.
THE WATER SOFTENER
The water softener removes minerals from the
water supply, which would have a detrimental effect
on the washing results and on the appliance.
The higher the content of these minerals, the harder
your water is. Water hardness is measured in
equivalent scales.
The water softener should be adjusted according to
the hardness of the water in your area. Your local
water authority can advise you on the hardness of
the water in your area. It is important to set the right
level of the water softener to assure good washing
results.
USING SALT, RINSE AID AND DETERGENT
•
Only use salt, rinse aid and detergent for
dishwasher. Other products can cause damage
to the appliance.
•
In areas with hard and very hard water we
recommend to use plain dishwasher detergent
(powder, gel, tablets containing no additional
agents), rinse aid and salt separately for optimal
cleaning and drying results.
•
At least once a month run the appliance with the
use of appliance cleaner which is particularly
suitable for this purpose.
•
Detergent tablets do not fully dissolve with short
programmes. To prevent detergent residues on
the tableware, we recommend that you use the
tablets with long programmes.
12
•
Do not use more than the correct quantity of
detergent. Refer to the instructions on the
detergent packaging.
WHAT TO DO IF YOU WANT TO STOP USING
MULTI-TABLETS
Before you start to use separately detergent, salt
and rinse aid do the following procedure.
1. Set the highest level of the water softener.
2. Make sure that the salt and rinse aid containers
are full.
3. Start the shortest programme with a rinsing
phase. Do not add detergent and do not load
the baskets.
4. When the programme is completed, adjust the
water softener according to the water hardness
in your area.
5. Adjust the released quantity of rinse aid.
offers the
6. Activate the rinse aid empty notification.
LOADING THE BASKETS
•
Use the appliance to wash dishwasher-safe
items only.
•
Do not wash in the appliance items made of
wood, horn, aluminium, pewter and copper.
•
Do not wash in the appliance items that can
absorb water (sponges, household cloths).
•
Remove large food residues from dishes.
•
Soak cookware with burnt-on food before
washing it in the appliance.
•
Put hollow items (cups, glasses and pans) with
the opening facing downwards.
•
Make sure that glasses do not touch each other.
•
Put light items in the upper basket. Make sure
that the items do not move freely.
•
Put cutlery and small items in the cutlery drawer.
•
Move the upper basket upwards to
accommodate large items in the lower basket.
•
Make sure that the spray arms can move freely
before you start a programme.
BEFORE STARTING A PROGRAMME
Before you start the selected programme, make
sure that:
•
The filters are clean and correctly installed.
•
The cap of the salt container is tight.
•
The spray arms are not clogged.
•
There is enough salt and rinse aid (unless you
use multi-tablets).
•
The arrangement of the items in the baskets is
correct.
•
The programme is suitable to the type of load
and the degree of soil.
•
The correct quantity of detergent is used.