Zanussi ZDV12001FA User Manual - Page 12

Browse online or download pdf User Manual for Dishwasher Zanussi ZDV12001FA. Zanussi ZDV12001FA 16 pages. Product manaul

Print Page

Alarm code

• The indicator of the set programme flashes contin-

uously.

• The end indicator flashes 2 times intermittently.

• The indicator of the set programme flashes contin-

uously.

• The end indicator flashes 3 times intermittently.

Warning! Deactivate the appliance before

you do the checks.

Problem

You cannot activate the appliance.

The programme does not start.

The appliance does not fill with water.

The appliance does not drain the water.

The anti-flood device is on.

After the checks are completed, activate the

appliance. The programme continues from the

point of interruption.

If the problem occurs again, contact the Serv-

ice.

If other alarm codes appear, contact the Serv-

ice.

If the washing and drying results are not

satisfactory

Whitish streaks or bluish layers on

glasses and dishes

• The released quantity of rinse aid is too

much. Adjust the rinse aid selector to a lower

position.

• The quantity of detergent is too much.

The appliance does not drain the water.

The anti-flood device is on.

Possible solution

Make sure that the mains plug is connected to the mains

socket.

Make sure that there is not a damaged fuse in the fuse box.

Make sure that the appliance door is closed.

Make sure that the water tap is open.

Make sure that the pressure of the water supply is not too

low. For this information, contact your local water authority.

Make sure that the water tap is not clogged.

Make sure that the filter in the inlet hose is not clogged.

Make sure that the inlet hose has no kinks or bends.

Make sure that the sink spigot is not clogged.

Make sure that the drain hose has no kinks or bends.

Close the water tap and contact the Service.

Stains and dry water drops on glasses

and dishes

• The released quantity of rinse aid is not suffi-

cient. Adjust the rinse aid selector to a higher

position.

• The quality of the detergent can be the

cause.

Dishes are wet

• The programme is without a drying phase or

with a low temperature drying phase.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the cause.

Refer to 'HINTS AND TIPS' for other pos-

sible causes.

Problem