Zanussi ZSLN1211 User Manual - Page 10

Browse online or download pdf User Manual for Dishwasher Zanussi ZSLN1211. Zanussi ZSLN1211 21 pages.
Also for Zanussi ZSLN1211: User Manual (28 pages)

Print Page

•

is off = AirDry is off.

•

is on = AirDry is on.

3. Press the programme button to change the

setting.

BEFORE FIRST USE

1. Make sure that the current level of the

water softener agrees with the hardness

of the water supply. If not, adjust the level

of the water softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any processing

residuals that can still be inside the appliance.

Do not use detergent and do not put dishes in

the baskets.

After starting the programme, the appliance

recharges the resin in the water softener for up to 5

minutes. The washing phase starts only after this

procedure is complete. The procedure is repeated

periodically.

THE SALT CONTAINER

CAUTION! Use rough salt designed

for dishwashers only. Fine salt

increases the risk of corrosion.

The salt is used to recharge the resin in the water

softener and to assure good washing results in

daily use.

HOW TO FILL THE SALT CONTAINER

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt container (only for

the first time).

3. Fill the salt container with 1 kg of salt (until it is

full).

4. Carefully shake the funnel by its handle to get

the last granules inside.

4. Press the on/off button to confirm the setting.

5. Remove the salt around the opening of the salt

container.

6. Turn the cap of the salt container clockwise to

close the salt container.

CAUTION! Water and salt can come

out of the salt container when you fill

it. After you fill the salt container,

immediately start a programme to

prevent corrosion.

HOW TO FILL THE RINSE AID DISPENSER

CAUTION! The compartment (C) is for

rinse aid only. Do not fill it with

detergent.

CAUTION! Only use rinse aid

designed specifically for dishwashers.

1. Press the release element (A) to open the lid

(B).

2. Pour the rinse aid in the dispenser (C) until the

liquid reaches the marking "FILL".