Zanussi ZSLN1211 User Manual - Page 16

Browse online or download pdf User Manual for Dishwasher Zanussi ZSLN1211. Zanussi ZSLN1211 28 pages.
Also for Zanussi ZSLN1211: User Manual (21 pages)

Print Page

• Load the dishwasher to its full capacity to

save water and energy. For best cleaning

results, arrange items in the baskets as

instructed in the user manual and do not

overload the baskets.

• Do not pre-rinse dishes by hand. It

increases the water and energy

consumption. When needed, select a

programme with a prewash phase.

• Remove larger residues of food from the

dishes and empty cups and glasses

before putting them inside the appliance.

• Soak or slightly scour cookware with firmly

cooked-on or baked-on food before

washing it in the appliance.

• Make sure that items in the baskets do not

touch or cover each other. Only then can

the water completely reach and wash the

dishes.

• You can use dishwasher detergent, rinse

aid and salt separately or you can use the

multi-tablets (e.g. ''All in 1''). Follow the

instructions on the packaging.

• Select a programme according to the type

of load and the degree of soil.

offers the most efficient use of water and

energy consumption.

• To prevent limescale buildup inside the

appliance:

– Refill the salt container whenever

necessary.

– Use the recommended dosage of the

detergent and rinse aid.

– Make sure that the current level of the

water softener agrees with the

hardness of the water supply.

– Follow the instructions in the chapter

"Care and cleaning".

10.2 Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

designed for dishwasher. Other products

can cause damage to the appliance.

• In areas with hard and very hard water, we

recommend to use basic dishwasher

detergent (powder, gel, tablets containing

no additional agents), rinse aid and salt

separately for optimal cleaning and drying

results.

• Detergent tablets do not fully dissolve with

short programmes. To prevent detergent

residues on the tableware, we recommend

ENGLISH

that you use tablets with long

programmes.

• Always use the correct quantity of

detergent. Insufficient dosage of detergent

can result in poor cleaning results and

hard-water filming or spotting on the items.

Using too much detergent with soft or

softened water results in detergent

residues on the dishes. Adjust the amount

of detergent based on the water hardness.

Refer to the instructions on the detergent

packaging.

• Always use the correct quantity of rinse

aid. Insufficient dosage of rinse aid

decreases the drying results. Using too

much rinse aid results in bluish layers on

the items.

• Make sure that the water softener level is

correct. If the level is too high, the

increased quantity of salt in the water

might result in rust on cutlery.

10.3 What to do if you want to stop

using multi-tablets

Before you start to use separately detergent,

salt and rinse aid, complete the following

steps:

1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent and

do put dishes in the baskets.

4. When the programme is complete, adjust

the water softener according to the water

hardness in your area.

5. Adjust the released quantity of rinse aid.

6. Activate the rinse aid empty notification.

10.4 Loading the baskets

• Always use the whole space of the

baskets.

• Use the appliance to wash dishwasher-

safe items only.

• Do not wash the following materials in the

dishwasher: wood, horn, pewter, copper,

aluminium, delicate ornamented porcelain

and unprotected carbon steel. This can

cause them to crack, warp, discolour, pit

or rust.