Zanussi EHG6832 User Manual - Page 6

Browse online or download pdf User Manual for Hob Zanussi EHG6832. Zanussi EHG6832 16 pages. Zanussi cooktop user manual

Print Page

Green and Yellow

3 amp fuse

Brown

Cord clamp

Blue

Should the plug need to be replaced for any reason, the

wires in the mains lead are coloured in accordance with

the following code:

Green and Yellow

Blue

Building In

min. 600 mm

min. 55 mm

30 mm

- Earth

- Neutral

min. 650 mm

550 mm

Brown

1. Connect the green and yellow (earth) wire to the ter-

minal in the plug which is marked with the letter 'E' or

the earth symbol

2. Connect the blue (neutral) wire to the terminal in the

plug which is marked with the letter 'N' or coloured

black.

3. Connect the brown (live) wire to the terminal in the

plug which is marked with the letter 'L' or coloured

red.

Upon completion there must be no cut, or stray strands of

wire present and the cord clamp must be secure over the

outer sheath.

Important! A cut off plug inserted into a 13 amp socket is

a serious safety (shock) hazard. Ensure that the cut off

plug is disposed of safely.

Important! The replacement of electric cable must be

carried out exclusively by the service force centre or by

personnel with similar competencies, in accordance with

the current regulations.

Replacement of the connection cable

To replace the connection cable use only H05V2V2-F T90

or equivalent type. Make sure that the cable section is ap-

plicable to the voltage and the working temperature. The

yellow/green earth wire must be approximately 2 cm lon-

ger than the brown (or black) phase wire.

A - supplied seal

B - supplied brackets

- Live

or coloured green and yellow.