Zanussi GAS HOB ZGF 982 Instruction Booklet - Page 20
Browse online or download pdf Instruction Booklet for Hob Zanussi GAS HOB ZGF 982. Zanussi GAS HOB ZGF 982 32 pages. Zanussi instruction gas hob zgf 982
Also for Zanussi GAS HOB ZGF 982: Instruction Booklet (17 pages), Instruction Booklet (16 pages)
Print Page
Fitting the Hob into the Worktop
Carry out the building in of the hob as
follows:
1. place the seals supplied with the
hob on the side edges of the cut
out and at 8 mm. from the front
and rear edges, as shown in the
diagram, taking care that the
seals meet without overlapping;
2. place the hob in the cut out,
taking care that it is centred;
3. fix the hob with the relevant fixing
clamps and screws, as shown in
the diagram. When the screws
have been tightened, the excess
seal can be removed.
The edge of the hob forms a double seal
which prevents the ingress of liquids.
20
Seal