Zanussi ZEI3921IBA User Manual - Page 13

Browse online or download pdf User Manual for Hob Zanussi ZEI3921IBA. Zanussi ZEI3921IBA 32 pages. Product manaul

Print Page

Manufacturer is not responsible for any injury to persons

and pets or damage to property caused by failure to obey

these requirements.

Electrical connection

• Ground the appliance according to safety precautions.

• Make sure that the rated voltage and type of power on

the rating plate agree with the voltage and the power of

the local power supply.

• Any electrical component must be installed or replaced

by the Service Force Centre technician or qualified

service personnel.

• Always use a correctly installed shockproof socket.

• Make sure that there is an access to the mains plug af-

ter installation.

• Do not pull the mains cable to disconnect the appli-

ance. Always pull the mains plug.

• The appliance must not be connected with an extension

cable, an adapter or a multiple connection (risk of fire).

Check that the ground connection is in conformity with

the standard and regulations force.

• Connect the appliance to the mains with a device that

lets to disconnect the appliance from the mains at all

poles with a contact opening width of minimum 3 mm,

eg. automatic line protecting cut-out, earth leakage

trips or fuse.

• None of a parts of the connection cable can not get a

temperature 90°C. The blue neutral cable must be con-

nected to the terminal block label with "N". The brown

(or black) phase cable (fitted in the terminal block con-

tact marked with "L") must always be connected to the

live phase.

Replacement of the connection cable

To replace the connection cable use only H05V2V2-F T90

or equivalent type. Make sure that the cable section is ap-

plicable to the voltage and the working temperature. The

yellow/green earth wire must be approximately 2 cm lon-

ger than the brown (or black) phase wire.

www.zanussi.com

Assembly

min. 650 mm

If several 30 cm hobs are to be installed side by side into

the same cut out, an assembly kit including a support side

bracket and supplementary seals is available at our Serv-

ice Centres. The relevant installation instructions are sup-

plied within the kit package.

R 5

490

490 mm

270 mm

600

270

+1 mm