Zanussi ZEI6240FBA User Manual - Page 8

Browse online or download pdf User Manual for Hob Zanussi ZEI6240FBA. Zanussi ZEI6240FBA 16 pages. Product manaul

Print Page

Heat

setting

4-5

Cook larger quantities of food, stews and

soups

6-7

Gentle fry: escalope, veal cordon bleu, cut-

lets, rissoles, sausages, liver, roux, eggs,

pancakes, doughnuts

7-8

Heavy fry, hash browns, loin steaks, steaks

Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep-fry chips

Care and cleaning

Clean the appliance after each use.

Always use cookware with clean bottom.

Scratches or dark stains on the glass-ce-

ramic cause no effect on how the appli-

ance operates.

To remove the dirt:

1. – Remove immediately: melted plastic,

plastic foil, and food with sugar. If not,

the dirt can cause damage to the appli-

ance. Use a special scraper for the

glass . Put the scraper on the glass sur-

Troubleshooting

Problem

You cannot activate the appliance

or operate it.

The appliance deactivates.

The residual heat indicator does

not come on.

The sensor fields become hot.

comes on.

Use to:

Possible cause

You touched 2 or more sensor

fields at the same time.

There is water or fat stains on the

control panel.

You put something on the sensor

field

The cooking zone is not hot be-

cause it operated only for a short

time.

The cookware is too large or you

put it too near to the controls.

The Automatic Switch Off oper-

ates.

Time

60-150

Up to 3 l liquid plus ingredients

min

as nec-

Turn halfway through

essary

5-15 min

Turn halfway through

face at an acute angle and move the

blade on the surface .

– Remove after the appliance is suffi-

ciently cool: limescale rings , water

rings, fat stains, shiny metallic discolora-

tions. Use a special cleaning agent for

glass ceramic or stainless steel.

2. Clean the appliance with a moist cloth and

some detergent.

3. At the end rub the appliance dry with a

clean cloth.

Activate the appliance again and

set the heat setting in less than 10

seconds.

Touch only one sensor field.

Clean the control panel.

Remove the object from the sen-

sor field.

If the cooking zone operated suffi-

ciently long to be hot, speak to the

service centre.

Put large cookware on the rear

cooking zones if necessary.

Deactivate the appliance and acti-

vate it again.

Hints

Remedy