Zanussi ZGG35214 User Manual - Page 10

Browse online or download pdf User Manual for Hob Zanussi ZGG35214. Zanussi ZGG35214 16 pages.
Also for Zanussi ZGG35214: User Manual (28 pages), User Manual (16 pages), User Manual (20 pages)

Print Page

Disconnect the appliance from the electrical

supply before you do cleaning or maintenance

work.

Warning! For safety reasons, do not clean

the appliance with steam cleaners or high-

pressure cleaners.

Warning! Do not use abrasive cleaners,

steel wool pads or acids. They can cause

damage to the appliance.

Scratches or dark stains on the surface

have no effect on how the appliance oper-

ates.

• You can remove the pan supports to easily

clean the hob.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy water

and dry them carefully before you put them

back.

• Wash stainless steel parts with water, and

then dry them with a soft cloth.

• The pan supports are not dishwasher proof.

They must be washed by hand.

• When you wash the pan supports by hand,

take care when you dry them as the enamel-

ling process occasionally leaves rough

edges. If necessary, remove stubborn stains

using a paste cleaner.

• Make sure you position the pan supports

correctly after cleaning.

• To make the burners work correctly, make

sure that the arms of the pan supports are in

the centre of the burner.

What to do if...

Problem

There is no spark when lighting

the gas

• Be very careful when you replace the

After cleaning, dry the appliance with a soft

cloth.

The stainless steel can become tarnished if it is

too much heated. Refer to this you must not

cook with potstones, earthenware pans or cast

iron plates. Do not use aluminium foil to prevent

damage the top during operation.

Removing the dirt:

1. – Remove immediately: melting plastic,

2. Clean the appliance with a damp cloth and

3. At the end rub the appliance dry with a

Cleaning of the spark plug

This feature is obtained through a ceramic igni-

tion candle with a metal electrode. Keep these

components well clean to prevent difficult light-

ing and check that the burner crown holes are

not obstructed.

Periodic maintenance

Periodically speak your local Service Force

Centre to check the conditions of the gas sup-

ply pipe and the pressure adjuster, if fitted.

Possible cause

• There is no electrical supply

• Burner cap and crown are

placed uneven

pan supports to prevent the hob top

from damage.

plastic foil, and food containing sugar.

– Stop the appliance and let it cool

down before you clean: limescale rings,

water rings, fat stains, shiny metallic dis-

colorations. Use a special cleaner appli-

cable for surface of hob.

some detergent.

clean cloth.

• Make sure that the unit is con-

nected and the electrical supply

is switched on.

• Control the fuse. If the fuse is

released more than one time,

refer to a qualified electrician.

• Make sure that the burner cap

and crown are in correct posi-

tions.

Remedy