Zanussi ZGG62414 User Manual - Page 12

Browse online or download pdf User Manual for Hob Zanussi ZGG62414. Zanussi ZGG62414 16 pages. Product manaul
Also for Zanussi ZGG62414: User Manual (48 pages), User Manual (20 pages)

Print Page

To replace the connection cable use only

H05V2V2-F T90 or equivalent type. Make

sure that the cable section is applicable to the

voltage load and the working temperature. The

yellow/green earth wire (B) must be approxi-

mately 2 cm longer than the live and neutral

wire (A).

Warning! A cut off plug inserted into a 13

amp socket is a serious safety (shock)

hazard. Ensure that the cut off plug is disposed

of safely.

Important! The replacement of electric cable

must be carried out exclusively by the service

force centre or by personnel with similar

competencies, in accordance with the current

regulations.

Replacement of the connection cable

To replace the connection cable use only

H05V2V2-F T90 or equivalent type. Make sure

that the cable section is applicable to the volt-

age and the working temperature. The yellow/

green earth wire must be approximately 2 cm

longer than the brown (or black) phase wire.

Building In

min. 600 mm

min. 100 mm

min. 55 mm

30 mm

min. 650 mm

550 mm

A) supplied seal

B) supplied brackets

Caution! Install the appliance only on a

worktop with flat surface.

Possibilities for insertion

Kitchen unit with door

The panel installed below the hob must be easy

to remove and let an easy access in case a

technical assistance intervention is necessary.

30 mm

min 20 mm

60 mm

(max 150 mm)

a) Removable panel

b) Space for connections

Kitchen unit with oven

The hob recess dimensions must obey the indi-

cation and the kitchen unit must be equipped

with vents to let a continuous supply of air. The

electrical connection of the hob and the oven

must be installed separately for safety reasons

and to let easy remove oven from the unit.

50 cm

360 cm

120 cm

180 cm