Zanussi ZGGN645K User Manual - Page 14

Browse online or download pdf User Manual for Hob Zanussi ZGGN645K. Zanussi ZGGN645K 21 pages.

Print Page

The shape of pan supports and the amount of

burners can be different in other models of the

appliance.

CLEANING THE HOB

•

Remove immediately: melted plastic, plastic

foil, sugar and food with sugar, otherwise, the

dirt can cause damage to the hob. Take care to

avoid burns.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

WHAT TO DO IF...

Problem

There is no spark when you try

to activate the spark generator.

The flame extinguishes immedi-

ately after ignition.

The flame ring is uneven.

IF YOU CANNOT FIND A SOLUTION...

If you cannot find a solution to the problem yourself,

contact your dealer or an Authorised Service

•

Remove when the hob is sufficiently cool:

limescale rings, water rings, fat stains, shiny

metallic discoloration. Clean the hob with a

moist cloth and a non-abrasive detergent. After

cleaning, wipe the hob dry with a soft cloth.

•

To clean the enamelled parts, caps and crowns,

wash them with warm soapy water and dry them

carefully before you put them back on.

CLEANING THE SPARK PLUG

This feature is obtained through a ceramic ignition

candle with a metal electrode. Keep these

components well clean to prevent difficult lighting

and check that the burner crown holes are not

obstructed.

PERIODIC MAINTENANCE

Speak to your local Authorised Service Centre

periodically to check the conditions of the gas

supply pipe and the pressure adjuster, if fitted.

Possible cause

The hob is not connected to an

electrical supply or it is con-

nected incorrectly.

The fuse is blown.

Burner cap and crown are

placed incorrectly.

Thermocouple is not heated up

sufficiently.

Burner crown is blocked with

food residues.

Centre. Give the data from the rating plate. Make

sure, you operated the hob correctly. If not the

servicing by a service technician or dealer will not

be free of charge, also during the warranty period.

Remedy

Check if the hob is correctly

connected to the electrical

supply.

Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

Place the burner cap and

crown correctly.

After lightning the flame, keep

the knob pushed for equal or

less than 10 seconds.

Make sure that the injector is

not blocked and the burner

crown is clean.