Zanussi ZGL62I User Manual - Page 9

Browse online or download pdf User Manual for Hob Zanussi ZGL62I. Zanussi ZGL62I 12 pages. Gas hob

Print Page

Care and cleaning

Warning! Switch the appliance off and let it cool

down before you clean it. Disconnect the appliance

from the electrical supply, before carrying out any

cleaning or maintenance work.

Warning! For safety reasons, do not clean the

appliance with steam cleaners or high-pressure

cleaners.

Warning! Do not use abrasive cleaners, steel wool

pads or acids, they can cause damage to the

appliance.

• You can remove the pan supports to easily clean the

hob.

• To clean the enamelled parts, cap and crown, wash it

with warm soapy water.

• Stainless steel parts wash with water, and then dry with

a soft cloth.

• The pan supports are not dishwasher proof; they must

be washed by hand .

• When you wash the pan supports by hand, take care

when you dry them as the enamelling process occa-

sionally leaves rough edges. If necessary, remove

stubborn stains using a paste cleaner.

What to do if...

Problem

There is no spark when lighting the

gas

The gas ring burns unevenly

If there is a fault, first try to find a solution to the problem

yourself. If you cannot find a solution to the problem

yourself, speak your dealer or the local Service Force

Centre.

• Make sure you position the pan supports correctly after

• To make burners work correctly, make sure that the

• Be very careful when you replace the pan supports to

After cleaning, dry the appliance with a soft cloth.

The stainless steel can become tarnished if it is too much

heated. Refer to this you must not cook with potstones,

earthenware pans or cast iron plates. Do not use alumini-

um foil to prevent damage the top during operation.

Cleaning of the spark plug

This feature is obtained through a ceramic ignition candle

with a metal electrode. Keep these components well clean

to prevent difficult lighting and check that the burner

crown holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force Centre to

check the conditions of the gas supply pipe and the pres-

sure adjuster, if fitted.

Possible cause

• There is no electrical supply

• Burner cap and crown are placed

uneven

• Burner crown is blocked with food

residues

neer, the visit from the customer service technician or

cleaning.

arms of the pan supports are in the centre of the burn-

er.

prevent the hob top from damage.

• Make sure that the unit is connec-

ted and the electrical supply is

switched on.

• Control the fuse. If the fuse is re-

leased more than one time, refer

to a qualified electrician.

• Make sure that the burner cap and

crown are in correct positions.

• Make sure that the injector is not

blocked and the burner crown is

clear of food particles.

If you operated the appliance incorrectly, or the in-

stallation was not carried out by a registered engi-

Remedy