Zanussi ZHRN640K User Manual - Page 6

Browse online or download pdf User Manual for Hob Zanussi ZHRN640K. Zanussi ZHRN640K 16 pages.
Also for Zanussi ZHRN640K: User Manual (13 pages)

Print Page

have to move them on the cooking

surface.

2.4 Care and cleaning

WARNING!

Do not remove the buttons,

knobs or gaskets from the

control panel. Water may get

inside the appliance and cause

damage.

• Clean the appliance regularly to prevent

the deterioration of the surface material.

• Switch off the appliance and let it cool

down before cleaning.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Use only neutral detergents. Do not

use abrasive products, abrasive cleaning

pads, solvents or metal objects.

2.5 Service

• To repair the appliance contact the

Authorised Service Centre. Use original

spare parts only.

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Before the installation

Before you install the hob, write down the

information below from the rating plate. The

rating plate is on the bottom of the hob.

Serial number ...........................

3.2 Built-in hobs

Only use the built-in hobs after you assemble

the hob into correct built-in units and work

surfaces that align to the standards.

3.3 Connection cable

• For a single phase or two phase

connection, use the cable type: H05BB-F

or H03V2V2-F which withstands a

temperature of 90 °C or higher.

ENGLISH

• Concerning the lamp(s) inside this product

and spare part lamps sold separately:

These lamps are intended to withstand

extreme physical conditions in household

appliances, such as temperature,

vibration, humidity, or are intended to

signal information about the operational

status of the appliance. They are not

intended to be used in other applications

and are not suitable for household room

illumination.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to dispose of the

appliance.

• Disconnect the appliance from the mains

supply.

• To replace the damaged mains cable, use

the cable: H05BB-F or H03V2V2-F which

withstands a temperature of 90 °C or

higher. Contact an Authorised Service

Centre. The connection cable may only be

replaced by a qualified electrician.

3.4 Assembly

If you install the hob under a hood, please

see the installation instructions of the hood

for the minimum distance between the

appliances.