Zanussi ZIFN644K User Manual - Page 10

Browse online or download pdf User Manual for Hob Zanussi ZIFN644K. Zanussi ZIFN644K 20 pages.
Also for Zanussi ZIFN644K: User Manual (21 pages)

Print Page

• you do not deactivate a cooking zone or

change the heat setting. After some time

comes on and the hob deactivates.

The relation between the heat setting and

the time after which the hob deactivates:

Heat setting

, 1 - 2

3 - 4

6 - 9

5.3 The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat

setting or move your finger along the control

bar until you reach the correct heat setting.

5.4 Using the cooking zones

Put the cookware on the cross / square

which is on the surface that you cook. Cover

the cross / square fully. Induction cooking

zones adapt to the dimension of the bottom

of the cookware automatically. You can cook

with the large cookware on two cooking

zones at the same time.

5.5 JoinZone

The function operates when the

pot covers the centres of the two

zones.

This function connects two left side cooking

zones and they operate as one.

First set the heat setting for one of the left

side cooking zones.

To activate the function: touch

change the heat setting touch one of the

control sensors.

ENGLISH

The hob deactivates

after

6 hours

5 hours

4 hours

1.5 hour

. To set or

To deactivate the function: touch

cooking zones operate independently.

When you use only one cooking zone of the

pair we recommend that you use the rear

cooking zone. Also when you use large

cookware we recommend that you put it near

to the rear cooking zone.

5.6 Automatic Heat Up

Activate this function to get a desired heat

setting in a shorter time. When it is on, the

zone operates on the highest setting in the

beginning and then continues to cook at the

desired heating setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch

(

touch a desired heat setting. After 3 seconds

comes on.

To deactivate the function: change the

heat setting.

5.7 PowerBoost

This function makes more power available to

the induction cooking zones. The function

can be activated for the induction cooking

zone only for a limited period of time. After

this time the induction cooking zone

automatically sets back to the highest heat

setting.

Refer to "Technical data"

chapter.

To activate the function for a cooking

zone: touch

To deactivate the function: change the

heat setting.

5.8 Timer

• Count Down Timer

You can use this function to set the length of

a single cooking session.

First set the heat setting for the cooking

zone, then set the function.

. The

comes on). Immediately

comes on.