Zanussi ZKT 662 LN Operating Instructions Manual - Page 10

Browse online or download pdf Operating Instructions Manual for Hob Zanussi ZKT 662 LN. Zanussi ZKT 662 LN 25 pages. Ceramic built-in hob

Print Page

A horizontal line appears in the display when the resi-

dual temperature does not exceed 60 °C.

"H" appears in the display if the residual temperature

is above 60°C (see Residual Heat Indicator).

Try to switch off the cooking zone early, in or-

der to make use of the residual heat.

Switching off the hob

The appliance can be switched off at any time using

the hob ON/OFF control (1).

Over- - cooking protec-

tion

If one or more touch controls are activated for

a period longer than 20 seconds (by a pan, cut-

lery, overflowing food, etc.) the hob switches

off completely.

Safety cut- - out

If, one or more cooking zones are not switched off, the

safety cut out will be automatically oparated after a set

time (see table below).

Heating stage

1 / 2

3--4

6--8

Once the safety cut out has been activated, a horizon-

tal line appears in the display if the residual tempera-

ture is below 60°C, or «H» is shown if the residual tem-

perature is above 60°C (see Residual Heat Indicator).

In order to unlock the safety cut out, switch off the ap-

pliance with the hob ON/OFF control (1), and then

switch on again.

Heating time limitation

in hours

1.5

153