Zanussi DF47/55 Instructions For The Use And Care - Page 17

Browse online or download pdf Instructions For The Use And Care for Freezer Zanussi DF47/55. Zanussi DF47/55 20 pages. Fridge freezer
Also for Zanussi DF47/55: Instructions For Use Manual (20 pages)

7.
Turn the centre hinge (7) around
from its illustrated position and transfer to
the opposite side. To secure the centre
hinge, gently press up into top door (refit
any spacing washer(s) on the top side of
the hinge, to position top door at correct
height). Refit the two screws (8) to secure
centre hinge to cabinet. Ensure top door is
correctly aligned before fully tightening the
two screws.
8.
Refit the bottom door by carefully
sliding it onto the centre hinge pin.
Ensure that washer(s) (5) (fig. 5) (if
originally fitted) is/are on the lower hinge
pin (4), then push the pin (rounded end)
into the bush at the bottom of the door on
the side opposite to its original position.
9.
Taking care not to press down on the
door. The large foot/hinge assembly should
be transferred over to the opposite side of
the cabinet and screws (6 & 14) moved
over to their new positions in the hinge
foot (see fig. 5). It is important that the
spacer (15) is retained with screw (6) in
the channel between the base of the product
and the foot/hinge assembly when screwing
the foot/hinge assembly into its new
position.
10. Refit the small foot, its screw entering
the hole furthest from the cabinet front on
the flat portion of the base.
11. Replace the level adjuster (1).
12. Stand the appliance upright.
13. Using a pocket knife blade or similar
instrument, carefully prise out the plastic
plugs from the alternative handle positions
on the opposite sides of the doors. (Protect
the paintwork from damage with masking
tape or other suitable material between the
blade and painted surface).
Transfer the handles to their new positions
and push the plastic plugs into the vacated
screw holes.
14. Remember finally to carefully level the
freezer/fridge by means of the level adjusters
(1) in the feet - see page 5 of operating
instructions.
15