Zanussi ZBB24431SA User Manual - Page 10

Browse online or download pdf User Manual for Freezer Zanussi ZBB24431SA. Zanussi ZBB24431SA 13 pages. Fridge freezer

Print Page

3. Replace the used lamp with a new lamp of the

same power and specifically designed for

household appliances (the maximum power is

shown on the lamp cover).

4. Install the lamp cover.

5. Tighten the screw to the lamp cover.

6. Connect the plug to the mains socket.

7. Open the door.

Make sure that the light comes on.

INSTALLATION

WARNING! Refer to Safety chapters.

LOCATION

Refer to the assembly instructions for

the installation.

To ensure best performance, install the appliance

well away from sources of heat such as radiators,

boilers, direct sunlight etc. Make sure that air can

circulate freely around the back of the cabinet.

POSITIONING

Install the appliance in a dry, well ventilated indoors

where the ambient temperature corresponds to the

climate class indicated on the rating plate of the

appliance.

Climate

Ambient temperature

class

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Some functional problems might occur

for some types of models when

operating outside of that range. The

correct operation can only be

guaranteed within the specified

temperature range. If you have any

doubts regarding where to install the

appliance, please turn to the vendor,

to our customer service or to the

nearest Authorised Service Centre.

CLOSING THE DOOR

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to assembly

instructions.

3. If necessary, replace the defective door

gaskets. Contact the Authorised Service

Centre.

ELECTRICAL CONNECTION

CAUTION! Any electrical work

required to install this appliance

should be carried out by a qualified

electrician or competent person.

WARNING! This appliance must be

earthed.

The manufacturer declines any liability

should these safety measures not be

observed.

The wires in the mains lead are coloured in

accordance with the following code:

•

A - green and yellow: Earth

•

C - brown: Live

•

D - blue: Neutral

As the colours of the wires in the mains lead of this

appliance may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

1. Connect the wire coloured green and yellow to

the terminal marked either with the letter "E" or