Zanussi ZBF22456S1 User Manual - Page 8

Browse online or download pdf User Manual for Freezer Zanussi ZBF22456S1. Zanussi ZBF22456S1 17 pages.

Print Page

PERIODIC CLEANING

CAUTION! Do not pull, move or

damage any pipes and/or cables

inside the cabinet.

CAUTION! Take care of not to

damage the cooling system.

CAUTION! When moving the cabinet,

lift it by the front edge to avoid

scratching the floor.

The equipment has to be cleaned regularly:

1. Clean the inside and accessories with

lukewarm water and some neutral soap.

2. Regularly check the door seals and wipe clean

to ensure they are clean and free from debris.

3. Rinse and dry thoroughly.

4. If accessible, clean the condenser and the

compressor at the back of the appliance with a

brush.

This operation will improve the performance of

the appliance and save electricity consumption.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

WHAT TO DO IF...

Problem

The appliance does not oper-

ate.

The appliance is noisy.

Audible or visual alarm is on.

DEFROSTING THE FREEZER

The freezer compartment is frost free. This means

that there is no build up of frost when it is in

operation, neither on the internal walls nor on the

foods.

PERIODS OF NON-OPERATION

When the appliance is not in use for long periods,

take the following precautions:

1. Disconnect the appliance from electricity

supply.

2. Remove all food.

3. Clean the appliance and all accessories.

4. Leave the door/doors open to prevent

unpleasant smells.

Possible cause

The appliance is switched

off.

The mains plug is not con-

nected to the mains socket

correctly.

There is no voltage in the

mains socket.

The appliance is not suppor-

ted properly.

The cabinet has been re-

cently switched on or the

temperature is still too high.

The temperature in the appli-

ance is too high.

WARNING! If you want to keep the

appliance switched on, ask somebody

to check it once in a while to prevent

the food inside from spoiling in case of

a power failure.

Solution

Switch on the appliance.

Connect the mains plug to the

mains socket correctly.

Connect a different electrical ap-

pliance to the mains socket.

Contact a qualified electrician.

Check if the appliance stands

stable.

Refer to "Door open alarm"or

"High temperature alarm".

Refer to "Door open alarm"or

"High temperature alarm".