Zanussi zfc26400wa User Manual - Page 6
Browse online or download pdf User Manual for Freezer Zanussi zfc26400wa. Zanussi zfc26400wa 41 pages.
Also for Zanussi zfc26400wa: User Manual (44 pages), User Manual (49 pages), User Manual (44 pages)
SWITCHING ON
1. Insert the plug into the wall socket.
2. Turn the Temperature Regulator to the Full
Loaded position and let the appliance run for
24 hours to allow the correct temperature to be
reached before placing food inside. The power
indicator light will light up.
3. Adjust the Temperature Regulator according to
the quantity of the stored foods.
SWITCHING OFF
Turn the Temperature regulator to the "0" position.
TEMPERATURE REGULATION
The temperature within the appliance is controlled
by the Temperature Regulator situated on the
control panel.
To operate the appliance, proceed as follows:
•
to obtain a lower temperature inside the
appliance, turn the Temperature Regulator
clockwise.
•
to obtain a higher temperature inside the
appliance, turn the Temperature Regulator
counterclockwise .
DAILY USE
WARNING! Refer to Safety chapters.
FREEZING FRESH FOOD
The freezer compartment is suitable for freezing
fresh food and storing frozen and deep-frozen food
for a long time.
The maximum amount of food that can be frozen in
24 hours is specified on the rating plate (refer to
"Technical data").
The freezing process lasts 24 hours: during this
period do not add other food to be frozen.
STORAGE OF FROZEN FOOD
When first starting-up or after a period out of use,
before putting the products in the compartment let
the appliance run at least 24 hours Temperature
Regulator to the Full Loaded position.
6
In case of freezing less food volumes,
the Half Loaded setting is the most
suitable. In case of freezing large
amounts of food, the Full Loaded
setting is the most suitable (refer to
"Switching on").
However, the exact setting should be
chosen keeping in mind that the
temperature inside the appliance
depends on:
•
room temperature
•
how often the lid is opened
•
the quantity of food stored
•
the location of the appliance.
HIGH TEMPERATURE ALARM
An increase in the temperature in the freezer (for
example due to a power failure) is indicated by
switching on of the Alarm light .
During the alarm phase, do not place food inside
the freezer.
When normal conditions are restored, the Alarm
light will switch off automatically.
CAUTION! In the event of accidental
defrosting, for example due to a power
failure, if the power has been off for
longer than the value shown in the
technical characteristics chart under
"rising time", the defrosted food must
be consumed quickly or cooked
immediately and then re-frozen (after
cooling).
OPENING AND CLOSING THE LID
CAUTION! Never pull the handle with
immense force.
As the lid is equipped with a tightly closing seal, it
is not easy to reopen it shortly after closing (due to
the vacuum formed inside). Wait for few minutes
before reopening the appliance.
The vacuum valve will help you to open the lid.
FREEZING CALENDAR
The symbols show different types of frozen goods.
The numbers indicate storage times in months for
the appropriate types of frozen goods. Whether the
upper or lower value of the indicated storage time