Zanussi ZFT 410W Instruction Book - Page 35

Browse online or download pdf Instruction Book for Freezer Zanussi ZFT 410W. Zanussi ZFT 410W 48 pages.

Print Page

Take the door off.

Unscrew the top door holding pin and put it on the

other side.

Fit the door to the top door holding pin.

Fix the bottom door holders on the other side being

careful that the edge of the door is parallel with the

side of cupboard.

Then screw in the one screw in the place set free on

the other side as well as the adjustable feet (2

pieces) and set up the box.

Put over the handle and the plastic nails on the other

side.

Put the appliance to its place, set it level and apply

voltage to it.

In case you do not want to perform the procedures

above, call the nearest brand-mark service. Technicians

will accomplish the refitting expertly for charge.

Downloaded from Fridge-Manual.com Manuals

Electrical connection

This refrigerator is designed to operate on a

230-240 V AC ( ~ ) 50 Hz supply.

The plug must be put into a socket with protective

contact. If there is no such, it is recommended to get

an electrician to fit an earthed socket in compliance

with standards near the refrigerator.

This appliance complies with the following E.E.C.

Directives:

73/23 EEC of 19.02.73 (Low Voltage Directive) and

subsequent modifications,

89/336 EEC of 03.05.89 (Electromagnetic

Compatibility

Directive)

modifications.

96/57 EEC - 96/09/03 (Energy Efficiency

Directive) and its subsequent amendments

and

subsequent