Zanussi ZV 1020 S Instruction Booklet - Page 5

Browse online or download pdf Instruction Booklet for Freezer Zanussi ZV 1020 S. Zanussi ZV 1020 S 10 pages.

Print Page

Changing the opening direction of the door

Unplug the freezer before performing the following

operations:

Remove the ventilation grid (C-Fig. 1).

Unscrew the bottom hinge (D-Fig. 1).

Remove the door from the upper pivot (A-Fig. 2).

Remove the pivot from the upper hinge (B), then

mount it on the opposite side.

Re-assemble the door.

Screw down the bottom hinge (D-Fig. 1) on the

opposite side by using the screws previously

removed.

Detach the plug (E-Fig. 1) from the ventilation grid

(C). To do this, press it in the direction of the arrow.

Introduce the plug into the hole left free on the

opposite side.

Re-assemble the ventilation grid.

Reverse the direction of the handle (Fig. 3).

The unused opening direction is concealed by plastic

plugs. Therefore, these plugs are to be mounted on

the holes left free.

Aligning the worktop of the appliance with the

kitchen furniture

The appliance worktop is aligned with the door.

It can however be easily aligned to the kitchen

furniture by proceeding as follows:

unscrew the screws on the upper hinges (F-Fig. 4)

that fasten the worktop to the appliance.

Move the worktop to the desired position and

tighten the screws again.

D229

D230

D162

Fig. 1

Fig. 2

Fig. 3