Zanussi ZHC 920 Operating Instructions Manual - Page 6

Browse online or download pdf Operating Instructions Manual for Ventilation Hood Zanussi ZHC 920. Zanussi ZHC 920 14 pages.

Print Page

4.3 - Installation of the

chimney A

No matter which type of installation is

being used, any wooden shelves in the

area where the hood is to be fitted must

first be removed, drilled and later

replaced.

1 - Drilling the shelves:

a) Using the cardboard template provided,

and taking hole "B" as a point of reference,

drill the shelves along the central axis to

allow the passage of the chimney. The

chimney must be inserted into the shelves

before it is fixed to the hood canopy C (fig.

12).

b) When installing the ducting version with

the air outlet directed upwards, if the

ducting fan unit is positioned below the

line of shelves it will be necessary to drill a

suitable hole in the top shelf only, to allow

the air ducting pipe to pass through

(fig. 13).

2 - Direction and position of the ducting

fan unit

a) The hood is normally supplied with the air outlet directed towards

A08_14

replace it on the rear part (fig. 15).

· Air outlet directed towards the wall (fig. 3).

- Remove the plastic frame from the air outlet (fig. 16).

A03_12

A03_13

the wall (fig. 3), if it is to be installed

with the air outlet directed to the

right or left (fig. 4a-b), it will be

necessary to change the direction of

the ducting fan unit,

proceeding as follows:

- Unscrew the screws U (fig. 14);

- Turn the ducting fan unit 60 to

the right or left;

- Replace the screws U.

b) The ducting fan unit air outlets

must be arranged according to the

type of installation to be carried

out.

· Air outlet directed upwards

(fig. 2a-b).

- Remove the plastic plug from the upper part of the venting grill and