Clarke Air SP15ND Operating & Maintenance Instructions - Page 14
Browse online or download pdf Operating & Maintenance Instructions for Air Compressor Clarke Air SP15ND. Clarke Air SP15ND 17 pages. Engine driven
Print Page
Compressor unit runs
on and off load more
frequently than usual.
Compressor unit runs
'on load' when no air is
being used.
Compressor's oil
consumption rising.
Oil in the air delivered.
Oil level rises although
no oil has been put in.
Condensation at outlet
points.
Torque values for cylinder head bolts
M
O
D
L E
N
U
M
B
E
R
S
P
1
5
N
D
Large amount of condensation in
air receiver.
Leaks in system
Leaks in system.
Too much oil in compressor.
Leaks around crank case.
Working temperature of
compressor too high because of
insufficient cooling.
Cylinder worn.
Intake air filter blocked.
Sump over full.
Cylinder worn.
Intake air filter blocked.
Condensation in oil pump.
Piping installation incorrect.
Compressor taking in air which is
too warm.
- 14 -
Drain off condensation Regularly
(Every day before use).
Locate leaks (by means of soapy
water) and repair.
Locate leaks (by means of
soapy water) and repair.
Check oil level 2 or 3 minutes after
stopping.
Contact Clarke Service
Department
Increase ventilation to air
compressor.
Contact Clarke Service
Department
Clean or replace
Reduce oil to correct level.
Contact Clarke Service
Department
Clean / Change air filter.
Compressor over dimensioned.
Consult your local dealer.
Obtain better fresh-air supply to
compressor.
o T
q r
2
u
e
V
a
u
e l
(
N
M
)
0
6 .
-
2
1
6 .