Zanussi ZHC960 Instruction Booklet - Page 12
Browse online or download pdf Instruction Booklet for Ventilation Hood Zanussi ZHC960. Zanussi ZHC960 17 pages. Zanussi owners manual ventilation hood zhc960
Also for Zanussi ZHC960: Operating Instructions Manual (13 pages)
Clearance Heights
The cooker hood is designed to be fitted over a
cooking appliance at the clearance heights
stated, providing the maximum output of the
appliance beneath does not exceed the
maximums quoted in the Technical
Specifications.
If the output of the appliance below the cooker
hood exceeds the maximum outputs quoted,
please refer to the cooker manufacturer's
installation instructions.
A minimum clearance height of 650mm
(25½ins) is required when installed above a
built-in electric hob, or 700mm (27½ins) when
installed above a built-in gas hob.
A minimum clearance height of 685mm (27ins)
is required when installing above a slot-in
electric cooker, or 787mm (30½ins) when
installed above a slot-in cooker.
When installed between adjoining wall cabinets,
the wall cabinets must not overhang the hob
and the distance between the underside of the
cabinet and the worktop must be 450mm
(17¾ins), a gap of 50mm (2ins) must be
maintained either side of the hob.
This cooker hood must not be installed
above a cooking appliance with a high
level grill.
The hood can be installed above these heights
but for optimum performance it should be
installed at the distances quoted for the
appropriate heat source.
This appliance can be used in either extraction
mode (ducting) or recycling mode (filtering).
The hood is supplied suitable for recirculation
with the charcoal filters fitted.
When used in the extraction mode (ducting) the
charcoal filters are not required and must be
removed and destroyed.
INSTALLATION INSTRUCTIONS
A: Built-in Electric Hob:
B: Built-in Gas Hob:
C: Slot-in Electric Cooker: 685mm minimum clearance
D: Slot in Gas Cooker:
Page 12
650mm minimum clearance
700mm minimum clearance
787mm minimum clearance