Zanussi ZHP 637 Installation & Use Manual - Page 6
Browse online or download pdf Installation & Use Manual for Ventilation Hood Zanussi ZHP 637. Zanussi ZHP 637 11 pages.
Also for Zanussi ZHP 637: Installation, Use And Maintenance Handbook (40 pages), Instruction Manual (40 pages)
• The space between the edge of the hood and the
rear wall can be closed by applying the element
20 provided, using the screws supplied for this
purpose.
• Cut a hole ø 125 mm in the wall unit over the
hood.
• Connect the hood body outlet to the top part of
the wall unit using a rigid or flexible pipe ø120
mm, to be selected by the installer.
• Fix the pipe in position using sufficient pipe
clamps (not supplied).
• Fix the directional grille 8 on the recirculation air
outlet using the 2 screws 12e (2,9 x 9,5) provided.
• Ensure that the activated charcoal filters have
been inserted.
When installing the ducted version, connect the hood to the chimney using either a flexible or rigid
pipe ø 120 mm, the choice of which is left to the installer.
• Fix the pipe in position using sufficient pipe
clamps (not supplied).
• Remove any activated charcoal filters.
GB
CLOSING ELEMENT
Connections
RECIRCULATION VERSION AIR OUTLET
DUCTED VERSION AIR EXHAUST SYSTEM
14