Directed Directechs DB3 Installation Manual - Page 5

Print Page

Directed Directechs DB3 Installation Manual

Wiring diagram

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram (

(+) 12V

(MUX) Parking Lights:

Lt.Green/Orange, pin 5

BCM

(left end of dash, gray connector)

D2D Port

(AC) Tach Input

(MUX) Parking Lights Output

(+) Starter Output

(+) Accessory 2 Output

(+) Accessory 1 Output

(+) Ignition Output

(+) 12V Input

(-) Ground

(+)12V: Red, pin 1

(+) Ignition: Red/Blue, pin 2

Ignition Switch

(black connector at ignition switch)

(+) Acc. 1: Black/Orange or Pink/Yellow, pin 8

(+) Acc. 2: Black/White, pin 7

(+) Starter: Yellow or Pink/Orange, pin 6

403.CHRYSLER2 3.13 2003 Jeep Liberty

910 ohm resistor

Sentry Key Immobilizer Module

(black connector at ignition switch)

87a

Immob. Ignition:

Cut

Dk.Blue, pin 3

J1850: Yellow/Violet or White/Violet, pin 2

J1850: Violet/Yellow: 2

Ignition Interrupt (conn. side): Yellow: 8

Ignition Interrupt (vehicle side): Orange/Yellow: 9

(MUX) Door Lock Output: Violet/Green: 8

(MUX) Door Lock Output: Violet/Brown: 9

Without

OEM Alarm

Lock/Unlock

With

OEM Alarm

Arm/Disarm

OBDII

Diagnostic

Connector

(connector side view)

9: Pink: (+) Ignition Input

Refer to Vehicle

connections section for

wire and connector details.

Refer to Vehicle

connections section for

wire and connector details.

XKD2D65