Zanussi ZCG43330BA User Manual - Page 9

Browse online or download pdf User Manual for Cookers Zanussi ZCG43330BA. Zanussi ZCG43330BA 28 pages.

Turning the burner off
To put the flame out, turn the knob to the off
position
.
WARNING!
Always turn the flame down or
switch it off before you remove the
pans from the burner.

Hob - Hints and tips

WARNING!
Refer to Safety chapters.
Cookware
WARNING!
Do not put the same pan on two
burners.
WARNING!
Do not put unstable or damaged
pots on the burners to prevent from
spill and injury.
CAUTION!
Make sure that pot handles are not
above the front edge of the cooktop.
CAUTION!
Make sure that the pots are placed
centrally on the burners in order to
get maximum stability and to get
lower gas consumption.

Hob - Care and cleaning

WARNING!
Refer to Safety chapters.
General information
• Clean the hob after each use.
• Always use cookware with clean bottom.
• Scratches or dark stains on the surface have
no effect on how the hob operates.
• Use a special cleaner applicable for the
surface of the hob.
• Wash stainless steel parts with water, and
then dry them with a soft cloth.
www.zanussi.com
Lid Safety Device
Lid has safety device, which cuts off the gas
supply for the hob. It works only when the lid is
closed.
WARNING!
Always use the knob for the hob to
switch off a burner. Do not use the
lid as a cut-off device.
Diameters of cookware
WARNING!
Use cookware with diameters
applicable to the size of burners.
Burner
Rapid
Semi-rapid
Auxiliary
Energy saving
• If it is possible, always put the lids on the
cookware.
• When the liquid starts to boil, turn down the
flame to barely simmer the liquid.
Pan supports
The pan supports are not resistant
to washing in a dishwasher. They
must be washed by hand.
1. Remove the pan supports to easily clean
the hob.
Be very careful when you
replace the pan supports to
prevent the hob top from
damage.
2. The enamel coating occasionally can have
rough edges, so be careful when you wash
the pan supports by hand and dry them. If
Diameter of cook-
ware (mm)
180 - 260
120 - 220
80 - 160
9