Zanussi ZCV68000XA User Manual - Page 18
Browse online or download pdf User Manual for Cookers Zanussi ZCV68000XA. Zanussi ZCV68000XA 20 pages.
Also for Zanussi ZCV68000XA: User Manual (24 pages)
Print Page
Technical data
Dimensions
Height
Width
Depth
Top oven capacity
Main oven capacity
Location of the appliance
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
A
Minimum distances
Dimension
A
B
Levelling of the appliance
18
894 - 912 mm
600 mm
600 mm
37 l
74 l
B
A
mm
2
685
Use small feet on the bottom of appliance to set
the appliance top surface level with other
surfaces.
Anti-tilt protection
Adjust the appliance to the correct height and
put it in the correct area before you attach the
anti-tilt protection.
CAUTION!
Install the anti-tilt protection to
prevent the appliance from falling
under incorrect loads. The anti-tilt
protection only works when the
appliance is put in a correct area.
The anti-tilt protection has two parts (A + B).
You can find the anti-tilt protection (B) on the
right or left side of the rear wall of the appliance.
1. Install the anti-tilt protection (A) on the wall.
Make sure that the wall is made of a solid
material. If not, you need to make the wall
sufficiently strong to hold the weight.
Make sure that the surface behind the
appliance is smooth.
2. Put the appliance in the middle of the space
between the cupboards.
If the space is larger than the width of the
appliance, you must adjust the side
measurement.
3. Install the anti-tilt protection (A)
approximately 77 mm below the top surface
of the appliance and 50 mm from the left or
right side of the appliance into the circular
hole on the bracket. Screw it into the wall.
B
www.zanussi.com