Califone 2395-02 Music MakerPlus User Manual - Page 10

Browse online or download pdf User Manual for Cassette Player Califone 2395-02 Music MakerPlus. Califone 2395-02 Music MakerPlus 17 pages. Dual cassette multimedia player/recorder

Print Page

CD Function

continued

To search forward or backward to a particular point on a track during playback

Press and hold the ('SKIP'|) or ('SKIP' |) buttons to search forward or backward through the

current track. Playback resumes at the point you release the button.

Program Playback

Up to 20 tracks can be programmed for playback. To program a song sequence:

1. Press 'STOP' first if the CD is playing.

2. Press the 'PROGRAM' button. The CD display will show P:01

3. Press the ('SKIP' |) and or ('SKIP'|) buttons to select the first track to program.

4. Once the desired track is reached, press the PROGRAM button to enter the track number into memory.

5. Repeat steps 3 & 4 to program additional tracks.

6. Press the 'PLAY/PAUSE' button to start programmed playback.

Note: The program will be erased when you press the 'CD PROGRAM' button.

Repeat CD Selections

Repeat one or all programmed selections using the 'CD REPEAT' button. Push the button once to replay any

single selection. Push the button twice to replay all programmed selections (in programmed order). Push

the button three times to clear the 'REPEAT' function. 'REPEAT ONE' or 'REPEAT ALL' will appear on the

CD PROGRAM DISPLAY when the 'CD REPEAT' button is pushed.

Cassette Function

Dual Cassette Operation

The 2395-02 features a cassette for playback and recording from radio, CD, cassette and microphone.

The dual cassette decks offer playback, continuous playback (Deck B to Deck A) and recording from

tape, radio, microphone or CD on Deck A only.

Loading a Tape

To load a cassette tape, press the 'STOP/EJECT' button (34) on Tape A or (35) on Tape B to open the

cassette door. Insert tape with playing side label facing you. Close the cassette door to lock the tape in

position. Note: While Deck A is in playback mode, Deck B must be stopped and not in 'PLAY' or 'PAUSE'

mode for Deck A to playback.

Tape Playback

To play a loaded cassette tape:

1. Set 'FUNCTION' button to TAPE

2. Press 'PLAY' Deck A or B (38) (39)

3. Adjust VOLUME' (7) (8)

4. Adjust 'TREBLE' (9) (10) and 'BASS' controls (11) (12)

To Stop Playback

Press the 'STOP/EJECT' key (34) (35).

To Pause Playback

Press the 'PAUSE' key (40) (41) all the way down to lock. To resume play, press the 'PAUSE' key again,

and release.

continued page 10

V i s i t u s o n l i n e a t c a l i f o n e . c o m