Clarke PE11C50 Operating & Maintenance Instructions - Page 5
Browse online or download pdf Operating & Maintenance Instructions for Air Compressor Clarke PE11C50. Clarke PE11C50 16 pages. Air compressor electric motor driven
Also for Clarke PE11C50: Operation & Maintenance Instructions Manual (17 pages)
Print Page
ELECTRICAL CONNECTIONS
IMPORTANT - SINGLE PHASE MACHINES ONLY
The wires in the mains lead of this machine are coloured in accordance with the
following code:
As the colours of the wires in the lead of this appliance may not correspond with
the coloured markings identifying the terminals in your plug, proceed as follows.
•
The wire which is coloured green and yellow must be connected to the
terminal which is marked with the letter E or by the earth Symbol (
coloured green or green and yellow.
•
The wire which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black.
•
The wire which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
110V Model
Connect the mains lead to a suitable 110V (50Hz) electrical supply through
anapproved plug or a suitably fused isolator switch. If using a portable 110V
transformer,make sure it has a rated capacity sufficient to take the load of the
air compressor.
If in any doubt, consult a qualified electriction.
Green and Yellow
Blue
Brown
WARNING: This machine must be earthed.
–
Earth
–
Neutral
–
Live
5
) or