Clarke PP10ND Operating & Maintenance Instructions - Page 7
Browse online or download pdf Operating & Maintenance Instructions for Air Compressor Clarke PP10ND. Clarke PP10ND 20 pages. Air compressor
Also for Clarke PP10ND: Operating & Maintenance Manual (10 pages), Operating & Maintenance Instructions (17 pages)
Print Page
PREPARATION FOR USE
A. Environmental
Ensure the compressor
is
sited
on a firm level
surface.
Ensure
the
environment
is dry and
d
ust
free.
Ensure
there
is
adequate
ventilatio
n for:
a) Air intake to
co
mpressor
pump
b)
Cooling for compressor
p
ump
c)
Engine
exha1
J st
gases.
B. Engine
Check oil and fuel levels and a visual
check
of components. Refer to engine service manual.
C. Pump
•
Check
oil
level
on the
Dipstick
- to
level
marked.
D.
Fuelling
Fill with unleaded petrol. according to the instructions within the engine manual.
Ensure the
fuel
tap
is set to the required position.
•
Ensure
The fuel hose and connectors are
intact,
in perfectly serviceable
condition
and
there is no
leakage.
Note : Always
use
a funnel to fill the fuel tank so as to avoid accidental spillage of
fuel. If fuel is spilled ii must be removed from the unit and surrounding area, b efore
attempting to start the
engine.
E,
Receiver
Drain off any
condensate.
by
opening
the
drain
cock
(see
Fig.
l
).
Remember
to c lose the cock when
completed.
NOTE:
This should
be
carried out DAILY when
the compressor
is
in
constant use.
F.
Air Hose & Air Tool
Attach
t
he air
hose to
the outlet using an appropriate
connector.
NOTE: Quick
fit
nuts
are
provided.
These may be
removed
if
a
1 /4"BSP is
required.
Attach
the air tool/spray gun to the
air
hose ... lf using
sna
p
couplings.
use
a whip
end,
available from your Clarke dealer.
~---------1
8
1------
l:lilrlrli