Directed Directechs DB3 Installation Manual - Page 5

Print Page

Directed Directechs DB3 Installation Manual

Wiring diagram

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram (

(-) Parking Lights: Blue, pin 18

CUT

Autolights Interrupt:

Orange, pin 19

D2D Port

(-) Parking Lights Output

(-) Hood Pin Input

(-) Ground

(AC) Tach Input

(+) Starter 1 Output

(+) Starter 2 Output

(+) Ignition 1 Output

(+) Ignition 2 Output

(+) 12V Input

(+) Accessory

Ignition, Accessory, Starter

& (+) 12V wires at ignition

switch, 8-pin connector

Refer to Vehicle

connections.

403.TL5 4.00 2012 Toyota Avalon (G Key)

White 20-pin conn.

(headlight switch)

HS CAN High: Pink, pin 6

Hood Pin

(transponder key amplifier

SIL: Violet, pin 7

Diagnostic

Connector OBDII

(connector side view)

HS CAN Low:

White or Tan, pin 14

TX DATA Violet/Yellow: 2

HS CAN High: Tan/Black: 3

HS CAN Low: Tan: 4

SIL DATA: Brown: 7

DATA Input: Yellow: 8

RDA: Orange/Yellow: 9

Autolights Interrupt (veh. side): Orange/Red: 10

Autolights Interrupt (conn. side): Yellow/Red: 11

(-) Keysense Output: Green/Black: 2

(AC) Tach Output: Violet/White: 5

DATA Output: Yellow/Black: 10

RX DATA: Orange/Black: 11

TX:

RX:

Brown

Lt.Green,

or Gray,

pin 4

pin 5

Black 7-pin conn.

at ignition switch)

Body ECU Connector

(back of dash fuse box)

RDA: Lt.Green, pin 12

6: White/Black: (-) Keysense Input

White 4-pin conn.

(key switch)

XKD2D65

Keysense:

Black or Tan, pin 2