Blackberry ITC100-2 Installation Manual - Page 12

Browse online or download pdf Installation Manual for Radar Blackberry ITC100-2. Blackberry ITC100-2 28 pages. Dry van, insulated trailers roll-up doors
Also for Blackberry ITC100-2: Installation Manual (33 pages), Installation Manual (26 pages), Installation Manual (32 pages), Installation Manual (33 pages), Installation Manual (35 pages), Installation Manual (28 pages), Installation Manual (34 pages), Installation Manual (35 pages), Installation Manual (30 pages), Installation Manual (35 pages), Instruction Manual (33 pages), Installation Manual (32 pages), Installation Manual (26 pages), Installation Manual (25 pages), Instruction Manual (35 pages)

Print Page

BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE

3. Remove the battery connector from the connector recess and connect the battery cable

to the battery connector. The LED will blink to indicate the module is active. NOTE: It can

take between 20-30 seconds for the blink sequence to begin. Please be patient. Once you

see the LED blink, you may continue to the next step.

IMPORTANT: When connecting the battery cable to the battery connector, do not

remove the Battery Connector Retaining Foam Retaining Tab or place the tab outside of

the battery connector opening area. The Battery Connector Retaining Foam Retaining Tab

is designed to fit within the battery connector opening area and provide

a secure fit for the battery connector latch. Please refer to the following images for the

proper orientation of the Battery Connector Retaining Foam Retaining Tab once the

battery cable is connected to the battery connector.

Correct Installation:

Battery Connector Retaining Foam

Retaining Tab inside of battery

connector opening

FLATBED AND HEAVY EQUIPMENT

LED

Incorrect Installation:

Battery Connector Retaining Foam

Retaining Tab outside of battery

connector opening