Blackberry ITC100-2 Installation Manual - Page 8

Browse online or download pdf Installation Manual for Radar Blackberry ITC100-2. Blackberry ITC100-2 28 pages. Dry van, insulated trailers roll-up doors
Also for Blackberry ITC100-2: Installation Manual (33 pages), Installation Manual (26 pages), Installation Manual (32 pages), Installation Manual (33 pages), Installation Manual (35 pages), Installation Manual (28 pages), Installation Manual (34 pages), Installation Manual (35 pages), Installation Manual (30 pages), Installation Manual (35 pages), Instruction Manual (33 pages), Installation Manual (32 pages), Installation Manual (26 pages), Installation Manual (25 pages), Instruction Manual (35 pages)

Print Page

BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE

3.3 Matching a module identifier to an asset identifier

In order to track an asset, the Radar H2 module that is installed on the asset must be associated

with the asset in the BlackBerry Radar Dashboard. It is, therefore, very important to keep a clear

record of which Radar H2 module is installed on which asset.

The Dashboard application tracks modules and assets using 'identifiers'. The asset identifier is

the name or number of the asset you wish to track. The asset identifiers are entered into the

application when you add the assets and will be listed on your installation worksheet. The

identifier for each Radar H2 module is printed on two labels—one attached to the inner housing

and the other in the battery compartment. The module identifier also serves as the serial

number (S/N) for the module.

To match a module identifier with an asset identifier:

1. Locate the module identifier for your device. The module identifier is shown in two

places.

1. Externally—temporary S/N label and permanent exterior S/N label, attached to

the front of the outer housing,

2. Internally—permanent main product label, in the battery compartment.

FLATBED AND HEAVY EQUIPMENT