Blackberry ITF100-1 Installation Manual - Page 7

Browse online or download pdf Installation Manual for Radar Blackberry ITF100-1. Blackberry ITF100-1 28 pages.
Also for Blackberry ITF100-1: Installation Manual (35 pages), Installation Manual (28 pages), Installation Manual (34 pages), Installation Manual (35 pages), Installation Manual (30 pages), Installation Manual (26 pages), Installation Manual (25 pages), Instruction Manual (35 pages)

Print Page

BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE

3.2 Installation tools

Required tools to complete the installation:

Phillips (PH2) Screwdriver or Bit

Nut Driver or

Socket Wrench with Socket*

*Nut Driver + Drill offers fastest installation.

If no Nut Driver is available, a socket wrench

and socket may be used as a substitute.

Recommended tools to complete the installation:

T-Square

Pocket Level

Torque Screwdriver/Adapter

with Socket and Bits*

(scale range of 0.4 N-m to 4.5 N-m,

in-lb to 40 in-lb)

*To check compliance with torque

specifications for fasteners.

Drill and Drill Bits

Safety Glasses

Towel

Hammer and

Punch

70% Rubbing

File

Alcohol

FLATBED AND HEAVY EQUIPMENT

Tape

Pencil or

Non-Permanent Marker

Tape Measure

Wrench

*Required only if nuts and bolts are

used.

Ladders*

*Tall ladder for installation on taller vehicles

and containers. Small ladder for installation

inside of containers or the exterior of smaller

vehicles.

Cutting Lubricant*

(Recommended)

*Recommended for faster drilling speed on

thicker metals and longer drill bit life.