Directed Xpresskit DBALL2 Installation Manual - Page 16

Browse online or download pdf Installation Manual for Door locks Directed Xpresskit DBALL2. Directed Xpresskit DBALL2 19 pages. Ford5 remote start ready (rsr) installation
Also for Directed Xpresskit DBALL2: Installation Manual (12 pages), Installation Manual (18 pages), Manual (14 pages), Installation Manual (13 pages), Installation Manual (14 pages), Installation Manual (19 pages), Installation Manual (16 pages), Installation Manual (20 pages), Installation Manual (15 pages), Installation And Quick Reference Manual (16 pages), Installation Manual (18 pages), Installation Manual (16 pages), Installation Manual (18 pages), Installation Manual (16 pages), Manual (19 pages)

Print Page
Directed Xpresskit DBALL2 Installation Manual

Quick Reference Guide

DBALL2-HYUNDAI4 Remote Start Ready (RSR) Installation
Vehicle Takeover
Press the remote start button on the transmitter to
1
start the vehicle.*
Press the Unlock button on the factory
2
or aftermarket remote.*
Complete the following steps within 45 seconds
or the vehicle will shut down.
Enter the vehicle, while making sure the
3
factory remote is inside with you.
Press the PTS button twice to turn the
4
ignition ON.
Press the brake pedal, put the car
5
in gear and drive off.
* Your aftermarket remote may differ from the model shown in the illustrations.
Press
remote start
button*
Press Unlock
OR
button on
either remote*
Enter vehicle
with Smart Key
ENGINE
2X
PUSH
START
STOP
Ready to
drive off
Pit Stop Mode
The Pit Stop Mode feature is practical when you need to stop and run an errand,
but wish to keep the engine running.
Stop the vehicle in a safe parking spot
1
and put the gear in Park (P).
Press the button to remote start the vehicle.*
2
The PTS button will flash once to
indicate the vehicle is now in Pit Stop
Mode.
It is now safe to leave the engine running and exit the
vehicle with the factory remote in hand.
3
Note: We recommend that you always lock the doors
of your vehicle when leaving it unattended.
* Your aftermarket remote may differ from the model shown in the illustrations.
Parking Light Error Codes
The parking lights on your vehicle will flash a specific number of times 3 seconds
following an unscheduled shutdown or failure to start. Each flashing pattern is
described below.
Flashes
Diagnostic
1
Runtime expired.
2
Over-rev shutdown.
3
Low/No RPM.
4
Transmitter shutdown.
5
Brake shutdown.
6
Hood shutdown/Remote start safety override switch is ON*.
7
Remote start safety override switch is ON*.
* If the vehicle hood status is supported through data, safety override switch input
will report 7 flashes.
P
&
Stop & put vehicle in Park (P)
Press
ENGINE
&
START
remote start
STOP
button*
Flashes
Exit vehicle with
Smart Key
© 2016 Directed. All rights reserved.