Directed Xpresskit DBALL2 Manual - Page 3

Browse online or download pdf Manual for Door locks Directed Xpresskit DBALL2. Directed Xpresskit DBALL2 14 pages. Ford5 remote start ready (rsr) installation
Also for Directed Xpresskit DBALL2: Installation Manual (12 pages), Installation Manual (19 pages), Installation Manual (18 pages), Installation Manual (13 pages), Installation Manual (14 pages), Installation Manual (19 pages), Installation Manual (16 pages), Installation Manual (20 pages), Installation Manual (15 pages), Installation And Quick Reference Manual (16 pages), Installation Manual (18 pages), Installation Manual (16 pages), Installation Manual (18 pages), Installation Manual (16 pages), Manual (19 pages)

Print Page

Platform: DBALL/DBALL2

Firmware: FORD5 Range Extender Ready (RXT) Installation

Wiring Diagram

Important!

The Remote Start Safety Override Switch is a mandatory safety device, but is NOT supplied with the DBALL.

OBDII Diagnostic Connector

MS CAN High:

HS CAN High:

Gray/Orange, pin 3

White/Blue, pin 6

MS CAN Low:

HS CAN Low:

Violet/Orange, pin 11

White, pin 14

(-) Ground:

Black or Black/White, pin 4

With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).

MS CAN High: Tan/Black: 3

MS CAN Low: Tan: 4

(+) 12V:

pin 16

HS CAN High: Orange/Green: 5

HS CAN Low: Orange/Brown: 6

(+) 12V: Red: 13

(-) Ground: Black: 14

DBALL/

Prog. Button

DBALL2

LED

You can connect to either a XL202

RFTD OR a SmartStart module.

Refer to the SmartStart/XL202

Installation Notes for more information.

Rev.: 20160317

Page 3