Blackberry Radar H2 Installation Manual - Page 6

Browse online or download pdf Installation Manual for Radar Blackberry Radar H2. Blackberry Radar H2 28 pages. Dry van, insulated trailers roll-up doors
Also for Blackberry Radar H2: Installation Manual (33 pages), Installation Manual (26 pages), Installation Manual (25 pages), Installation Manual (32 pages), Installation Manual (30 pages), Installation Manual (33 pages), Installation Manual (34 pages), Installation Manual (35 pages), Instruction Manual (33 pages), Installation Manual (32 pages), Installation Manual (26 pages), Installation Manual (25 pages)

Print Page

BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE

types of fasteners. Please Note: Your choice of fastener will influence the size of the tools

required to create the mounting holes (i.e. drill bits) and install or remove the fasteners (i.e.

wrenches/sockets/drivers). An example of this is provided below. The actual length of the

fasteners will be determined by the thickness of your mounting surface.

IMPORTANT: The maximum fastener thread diameter

supported by this product is ¼" or M6 (6 mm).

For most secure fastening, we do not recommend

using fasteners with a diameter less than that of a ¼"

or M6 fastener.

Box Section

(+3mm wall thickness)

I-Beam / Panel Section

(with rear access)

2 self-tapping screws and washers

(3/8" head, 1/4"-14 thread, 1-1/2" length)

2 hex bolts, nuts, and 4 washers

(7/16" head, 1/4"-20 thread, 1/4"-20 nut, 2" length)

(11mm head, M6 thread, 50mm length, M6 nut)

FLATBED AND HEAVY EQUIPMENT

Drill Bit

Nut Driver/Socket/Wrench

Drill Bit

Nut Driver/Socket/Wrench

3/16" (5mm)

1/4" (6mm)