Directed Xpresskit DBALL2 Manual - Page 12

Browse online or download pdf Manual for Door locks Directed Xpresskit DBALL2. Directed Xpresskit DBALL2 19 pages. Ford5 remote start ready (rsr) installation
Also for Directed Xpresskit DBALL2: Installation Manual (12 pages), Installation Manual (19 pages), Installation Manual (18 pages), Manual (14 pages), Installation Manual (13 pages), Installation Manual (14 pages), Installation Manual (19 pages), Installation Manual (16 pages), Installation Manual (20 pages), Installation Manual (15 pages), Installation And Quick Reference Manual (16 pages), Installation Manual (18 pages), Installation Manual (16 pages), Installation Manual (18 pages), Installation Manual (16 pages)

Print Page

Platform: DBALL/DBALL2

Firmware: FORD5 Remote Start Ready (RSR) Installation

Module Reset

A module reset will only erase programming performed in the previous steps. All settings (firmware) and settings flashed

to the module using the web config tool will not be affected.

If required for your installation, connect the 10-pin & 12-pin

harnesses to the module. Press and hold the programming

button, then connect the 14-pin harness to the module.

Wait 3 seconds until the LED turns ON solid orange then release the

programming button. The LED turns ON solid red.

Warning Against Executing a Hard Reset!

A hard reset will revert the flashed firmware back to its default settings. Depending on the installation, some settings (such

as RFTD and D2D options) may have to be reconfigured. See the Feature & Option List section of this guide.

If required for your installation, connect the 10-pin & 12-pin

harnesses to the module. Press and hold the programming

button, then connect the 14-pin harness to the module.

Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds

until the LED starts to flash orange and red.

Release the programming button. The LED turns ON solid red.

Solid

Release

Solid

Release

Rev.: 20160317

Page 12

Solid

Flashes

Solid