Clarke 6462011 Operating & Maintenance Instructions - Page 6

Browse online or download pdf Operating & Maintenance Instructions for Sander Clarke 6462011. Clarke 6462011 12 pages. Random orbital sander

Print Page

PREPARATION

Fitting Sanding Disk

Note :

Only use disks which have a velcro fixing capacity on the rear.

a) Ensure sander is switched OFF and plug is removed from mains socket.

b) Line up holes in disk with those on the machine pad. (This is necessary for dust

extraction), press disk firmly on to pad to secure it.

Handgrips

Your sander is fitted with two handgrips to ensure full control of the machine.

•

Main handgrip (handle) with ON/OFF switch and power cable.

•

Support grip.

Dust Collection

To fit the dust bag to your sander, slide the dust bag assembly, firmly over the dust

outlet, on the sander.

Note :

Dust bag must be emptied regularly, do not wait until it is completely full.

To Empty The Dust Bag

a) Ensure the sander is switched OFF and the plug has been removed from socket.

b) Remove dust bag assembly from sander by gently pulling it off of the dust outlet.

c) Take dust bag assembly to dustbin and slip bag off, (bag has elasticated top),

empty bag into bin.

d) Reassemble dust bag assembly and reattach it back on to the sander.

dust outlet

dust bag