Clarke CBK200C Operation & Maintenance Instructions Manual - Page 2

Browse online or download pdf Operation & Maintenance Instructions Manual for Sander Clarke CBK200C. Clarke CBK200C 8 pages. Polishing kit

Print Page

INTRODUCTION

Thank you for purchasing this CLARKE Polishing Kit.

Before use, read this manual thoroughly and follow all instructions given.

The polishing kit it is designed to fit to a bench mounted grinder (not supplied).

and is intended for polishing steel, brass, copper, nickel, chrome or silver

objects.

BENCH GRINDER REQUIRED SPECIFICATIONS

1. The maximum speed of the bench grinder must not exceed 3500 rpm.

2. The 6" polishing kit requires a bench grinder with a 12.7 mm spindle.

3. The 8" polishing kit requires a bench grinder with a 16 mm spindle.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of

12 months from the date of purchase. Please keep your receipt as proof of

purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

WHAT IS SUPPLIED

The polishing kit is supplied with

• 1 tapered shaft

• 1 stick of polishing compound

• 1 polishing wheel

• 1 buffing wheel

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]