Clarke Contractor CROS2 Operating & Maintenance Instructions - Page 5
Browse online or download pdf Operating & Maintenance Instructions for Sander Clarke Contractor CROS2. Clarke Contractor CROS2 12 pages. Random orbital sander
Print Page
ELECTRICAL CONNECTIONS
This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for
connection to a standard, domestic electrical supply. Should the plug need changing at
any time, ensure that a plug of identical specification is used.
This appliance is Double Insulated, and the two wires in the mains lead should
be wired up in accordance with the following colour code:
•
Connect the BLUE coloured wire to the plug terminal marked with a letter "N"
•
Connect the BROWN coloured wire to the plug terminal marked with a letter "L"
If this appliance is fitted with a plug which is
moulded on to the electric cable (i.e. non-
rewireable) please note:
1.
The plug must be thrown away if it is cut
from the electric cable. There is a
danger of electric shock if it is
subsequently inserted into a socket
outlet.
2.
Never use the plug without the fuse
cover fitted.
3.
Should you wish to replace a
detachable fuse carrier, ensure that the
correct replacement is used (as indicated by marking or colour code).
4.
Replacement fuse covers can be obtained from your local Clarke dealer or most
electrical stockists.
Fuse Rating
The fuse in the plug must be replaced with one of the same rating (13 amps) and this
replacement must be ASTA approved to BS1362.
If in doubt, consult a qualified electrician. Do not attempt any electrical repairs yourself.
Cable Extension
Always use an approved cable extension suitable for the power rating of this tool (see
specifications), the conductor size should also be at least the same size as that on the
machine, or larger. When using a cable reel, always unwind the cable completely. If using
tool outdoors, only use extension cables intended for outdoor use.
WARNING
BLUE
-
NEUTRAL
BROWN
-
LIVE
5